Addressable gas detectors GS-ADR.BC.V are intended for monitoring of combustible gases.

Different principles of detection with catalytic, semiconductor or electrochemical sensor elements are used.
Reliable operation of the sensor are guaranteed by the self diagnostic function. The condition of the sensor is constantli monitored and alert is activated in case of fault.

Sensor calibration is done remotely with magnetic key without opening the enclosure that facilitates periodic test and callibration.

Gas detectors GS-ADR.BC.V are in IP65 rated metal housing.

Addressable gas detectors GS-ADR.BC.V are designed to monitor the concentration of explosive gases and vapors.

Along with addressable gas controllers GA-ADR.E1 they can be integrated into the overall building automation system.

Detected gases

Formula

Measuring range

Order code

METHANE

0 - 100% LEL

GS-ADR.BC.V.CH4.100

PROPANE

0 - 100% LEL

GS-ADR.BC.V.PRO.100

N-BUTANE

0 - 100% LEL

GS-ADR.BC.V.PRO.100

N-PENTANE

0 - 100% LEL

GS-ADR.BC.V.PEN.100

N-HEXANE

0 - 100% LEL

GS-ADR.BC.V.HEX.100

N-HEPTANE

0 - 100% LEL

GS-ADR.BC.V.HEP.100

N-OCTANE

0 - 100% LEL

GS-ADR.BC.V.OCT.100

METHANOL

0 - 100% LEL

GS-ADR.BC.V.MNL.100

ETHANOL

0 - 100% LEL

GS-ADR.BC.V.ETL.100

ISO-PROPANOL

0 - 100% LEL

GS-ADR.BC.V.IPR.100

ACETONE

0 - 100% LEL

GS-ADR.BC.V.ACE.100

METHYL ETHYL KETONE

0 - 100% LEL

GS-ADR.BC.V.MEK.100

TOLUENE

0 - 100% LEL

GS-ADR.BC.V.TOL.100

ETHYL ACETATE

0 - 100% LEL

GS-ADR.BC.V.EAC.100

HYDROGEN

0 - 100% LEL

GS-ADR.BC.V.HYD.100

AMMONIA (LEL)

0 - 100% LEL

GS-ADR.BC.V.AMM.100L

UNLEADED PETROL

0 - 100% LEL

GS-ADR.BC.V.UPT.100

ETHYLENE

0 - 100% LEL

GS-ADR.BC.V.ETH.100

Sensors for gases, not listed in the table are made with preliminary order.

Gas Sense GS-ADR.BC.V

TECHNICAL SPECIFICATIONS

  • detection principle: semiconductor, catalytic, electrochemical
  • measuring range: 0–100% LEL
  • output signal: RS485
  • working voltage: 12÷30VDC
  • power consumption: < 2W
  • weight: 0.520 kg
  • sizes: 155 х 95 х 48 mm
  • enclosure material: aluminium
  • ingres protection: IP65
  • cable glands: 1/2/3 - М16/M20
  • working temperature: -20 ÷ + 50 ºC
  • humidity: 30 ÷ 90% RH
  • pressure: 1 bar ± 20%
  • sensor life: til 5 years for semiconductor and catalytic sensors
  • meets the requirements of EN 50270
  • ATEX certification:
  • II 2G Ex ma (ib) e IIC T4 Gb
  • II 2D Ex to(ib)ma IIIC T135C IP65 Db      
     

            Data sheet GS-ADR.BC.V