Gas detectors GS-220.BC.V are monitoring levels of hydrocarbon gases, organic solvents and their vapors, hydrogen, natural gas, LPG ​​and other combustible gases.
Different principles of detection with catalytic, semiconductor or electrochemical sensor elements are used.

Reliable operation of the detector is ensured by the self-diagnostic function, which constantly monitors the condition of the sensor and signal lines and alerts in case of fault.
Sensor calibration is done remotely with magnetic key without opening the enclosure that facilitates periodic inspection and maintenance.

Gas sensors GS-220.BC.V are in a metal housing with IP 65.

Analogue gas detector GS-220.BC.V is intended for detection and measurement of combustible gases.

Detected gases

Formula

Measuring range

Order code

METHANE

0 - 100% LEL

GS-220.BC.V.CH4.100

PROPANE

0 - 100% LEL

GS-220.BC.V.PRO.100

N-BUTANE

0 - 100% LEL

GS-220.BC.V.PRO.100

N-PENTANE

0 - 100% LEL

GS-220.BC.V.PEN.100

N-HEXANE

0 - 100% LEL

GS-220.BC.V.HEX.100

N-HEPTANE

0 - 100% LEL

GS-220.BC.V.HEP.100

N-OCTANE

0 - 100% LEL

GS-220.BC.V.OCT.100

METHANOL

0 - 100% LEL

GS-220.BC.V.MNL.100

ETHANOL

0 - 100% LEL

GS-220.BC.V.ETL.100

ISO-PROPANOL

0 - 100% LEL

GS-220.BC.V.IPR.100

ACETONE

0 - 100% LEL

GS-220.BC.V.ACE.100

METHYL ETHYL KETONE

0 - 100% LEL

GS-220.BC.V.MEK.100

TOLUENE

0 - 100% LEL

GS-220.BC.V.TOL.100

ETHYL ACETATE

0 - 100% LEL

GS-220.BC.V.EAC.100

HYDROGEN

0 - 100% LEL

GS-220.BC.V.HYD.100

AMMONIA (LEL)

0 - 100% LEL

GS-220.BC.V.AMM.100L

UNLEADED PETROL

0 - 100% LEL

GS-220.BC.V.UPT.100

ETHYLENE

0 - 100% LEL

GS-220.BC.V.ETH.100

Sensors for gases, not listed in the table are made with preliminary order.

Gas Sense GS-220.BC.V

Technical specifications

  • measurement principle: semiconductor, catalytic, electrochemical
  • measuring range: 0–100% LEL
  • output signal: 4-20mA
  • working voltage: 12V÷30VDC
  • power consumption: < 2W
  • weght: 0,520 kg
  • sizes: 155 х 95 х 48 mm
  • enclosure material: aluminium
  • ingress protection: IP65
  • cable glands: 1/2/3 - М16/M20
  • working temperature: -20 ÷ + 50 ºC
  • humidity: 30 ÷ 90% RH
  • pressure: 1 bar ± 20%
  • runtime: till 5 years under standard conditions for semiconductor and catalityc sensors
  • meets the requirements of EN 50270
  • ATEX certification:
  • Created with GIMP II 2G Ex ma (ib) e IIC T4 Gb
  • II 2D Ex to(ib)ma IIIC T135C IP65 Db            

            Data sheet GS-220.BC.V.